Low Profile Parts
All the short parts (resistors, decoupling caps, chip seats and SD card socket) fitted.
Bottom Caps
Don't forget the two decoupling capacitors under the Propeller.
Needs Chips
Assembled apart from the PropPlug mod and the chips. Tested and voltages correct and LEDs work.
Complete
Fully assembled Version5 DracBlade
PropPlug mod
Fitting a right-angle header in the top of the RS232 pinout allows mod wires for a prop-plug.
PropPlug Mod2
Another view of the PropPlug mod.
Contact
Email: nathan@nathandumont.com
Twitter: @hairymnstr
Sponsors
Links
The Amp Hour Electronics podcast.
EEVBlog An Australian electronic engineer with opinions.
Hack a Day a daily dose of awesome projects.
Make blog Maker blog posts from the net.
Bristol Hackspace Where I can be found most Thursday evenings.
Dorkbot Bristol People doing strange things with electricity.
![[valid|rss]](/sites/all/themes/nathan_fixed/images/validrss.gif)
![[valid|xhtml]](/sites/all/themes/nathan_fixed/images/xhtml.gif)
![[valid|css]](/sites/all/themes/nathan_fixed/images/css.gif)
