Z80 homebrew

It's been a (very) long time since the last update to this project. I've been busy on loads of new stuff for the project. The system is now capable of booting a binary from SD card or USB memory stick formatted in either FAT16 or FAT32. There's also full PS/2 keyboard support, a much more sophisticated interrupt control mechanism and a VGA display now.

A couple of minor updates you might be interested in. I got a quick demo echoing characters back to the PC working last week. This uses the interrupt on receive feature of the UART setup to trigger a send routine as soon as a character is received. The demo code is available on the Z80 Project page.

I left my Z80 project behind when I went to see family over Christmas, I did do a tiny bit of coding while I was on holiday but not much. Back in snowy Bath this weekend I got some more done on the project. I've spent a lot of time on the documentation. The main reason for this is the fact that I keep doing bits then not looking at it for a couple of weeks and I forget where I was and what changes I'd made.

At long last I've fitted a Z80 into the Z80 computer. I know shocking isn't it. After months of tinkering with it and fiddling with things using the on-board PIC I finally got the boot code sorted out and the clock generation (in the new file called boot.asm). After some serious head scratching about why id didn't work, I got it all running smoothly and counting on the debug port LEDs.

New Code

More progress on the Z80 project; I have fitted the first RAM chips tonight. After sorting the code so far into 3 source files, I implemented the memory read and memory write functions. These appeared to work on single memory locations, so I implemented the block read and write functions. Using a Python script (see the Z80 Project page for the file) I wrote the XOR combination of the high and low address bytes to each memory location, then read the memory back and tested it against this value.